HOW TO REMOTELY CONTROL YOUR PC WITH YOUR SMART PHONE

In this tutorial we will learn three (3) methods to remotely control your PC with your smart phone.

• Controlling your PC with your smart phone via Hotspot.

• Controlling your PC with your smart phone via WiFi.

• Controlling your PC with your smart phone via Ad-hoc network.

 

1. Controlling your PC with your smart phone via Hotspot 

• Download and install PC remote receiver setup from here.
• Download and install monect remote from playstore or here on your smart phone.
• Turn on your smart phone's hotspot.
• Connect your PC to the hotspot.
• Open monect remote app on your smart phone.
• Click on connect, the name of your PC will be displayed as shown below.

• Click on your PC name on your smart phone and you are connected.

View how to install PC remote Setup on your PC here.

2. Controlling your PC with your smart phone via WiFi.

• Download and install PC remote receiver setup from here.
• Download and install monect remote from playstore or here on your smart phone.
• Make your both your PC and smart phone is connected to the same WiFi.
• Open monect remote app on your smart phone.
• Click on connect, the name of your PC will be displayed as shown below.

• Click on your PC name on your smart phone and you are connected.

View how to install PC remote Setup on your PC here.

 

3. Controlling your PC with your smart phone via Ad-hoc network.

 

Verify that your PC support Ad-hoc network. As follows

• Open Command Prompt on your PC  
• Type - "netsh wlan show drivers" and press enter.
• Verify that hosted network support on the system is YES. As shown below.

Download and install PC remote receiver setup from here.
Download and install monect remote from playstore or here on your smart phone.

View how to install PC remote Setup on your PC here.

Create Ad-hoc network.

• Run command prompt (cmd) as administrator (right click on cmd and select run as administrator).
• On the User Account Control box click on Yes.
• On the cmd window "netsh wlan set hostednetwork mode=allow ssid=Example key=12345678" and press enter. The results will be as shown below.

Note: the key work "Example" can be replaced with any name preferred, and "12345678" can be replaced with a preferred password.

Start the created hosted network.

• On the command prompt interface, type- "netsh wlan start hostednetwork"
• The results will be as shown below.

• Turn on your phone's Wifi and connect to the network we just created using the password you specified in your code. (Our password in our example is 12345678)
• Open monect remote app on your smart phone.
• Click on connect, the name of your PC will be displayed as shown below.

• Click on your PC name on your smart phone and you are connected. 

Leave Your Comment in the Box.

Thank You..